Experimental hydrogen Fuel Cell Technology

This is a video fesaturing my design of a hydrogen fuelcell I want to adapt to motorvehicles. Visit www.showoffyourwheels.com in our chat forum under Alternative fuel technology to discuss this device further and give any pointers etc.

12 thoughts on “Experimental hydrogen Fuel Cell Technology

  1. ZEROPOINT132 says:

    H there, see my video on how to keep the water crystal clear, it shows a simple idea of separating the two gases, type in the search box {NO MORE- BROWN SLUDGE }cheers for the vid.

  2. Darkfoster22 says:

    Stainless steel has Chromium (VI) compounds
    and Your HHO generator pulls Chromium off the steel.So you have Chromium (VI)in the water and you get oxidation state from the + electrodes.Thats call (Hexavalent chromium) That can kill you… wach out

  3. nickypoo31 says:

    It is a simpl example of how this technology can be applied to automotive applications. For safety purposes when I do build the cell into a stainless pressure vessela flame arrestor will be installed, the unit will be powered by solar power in the vehicle so effectively it will produce fuel as it sits outside in the sunshine.

  4. nickypoo31 says:

    Only problem for not pressuring is that you cant do anything with it unless it is held in a pressure vessel and fitted to a motor vehicle. I will make another cell but this time out of stainless steel which will hold up to 2000 psi pressure and use a flame arrestor to prevent any possibility of flames entering the tank.
    will update as i go.

  5. variablestatus says:

    be careful, let gas out into open water bottle. don’t presurize… pulse the voltage to 20k hertz and you’ll quadruple the hydrogen output and lower the amperage usage. this is the top secret for all hydrogen experimentors/inventors. be careful though. goood video, thanks for sharing.

  6. sensihuvud says:

    safety first?……yea right! …..says the guy conducting an experiment without any eye/face/body protection.

    A fool wears no eye protection.

  7. nickypoo31 says:

    HHO ?

    Hydrogen and oxygen ?

    How do i seperate the two and still maitain the rapid dispertion of the gasses ?

  8. SmartScarecrow says:

    You are much braver than I am. 3-5 psi is often reached in some of my PVC drain pipe cells but only by accident. Can tell you that 500ml sealed up tight in a plastic bottle at a little less than 10psi when ignited makes a crater in tilled earth about .5 meter deep and about 1.5 meters in diameter. And gets the neighbors calling the cops on you.

  9. NewHopeBari says:

    Stop trying to store HHO!!! Run it through a bubbler and let it disipate, there is no reason for you to store HHO unless you want to blow yourself up!

Leave a Reply

Your email address will not be published. Required fields are marked *