This is our homemade shunt for running higher amperage tests in combination with our hho-cell. Everything here can be store bought at Home-Depot, Lowes, or just about any hardware store.
It is a hacksaw blade being used as a ‘shunt’ to measure amperage through our hho-cell. This in-fact will give us the ability to measure much higher amperage through our sensitive test equipment. The shape of the blade also gives great advantages for cooling with a heavier load.
Multimeter Reading:
About 0.1V at 5A for sensing
You might have to calibrate your own figures based on different style and/or manufactured hacksaw blades.
Best method for calibration would be to take something of known Wattage. We used a 12V-50Watt Bulb, and used that for verifying the output in millivolts. Works really well if you ask me. Hope this helps someone out there make their tests that much more viable.
Thanks for viewing my videos..
Regards, sirHOAX
This video is all crap, for the real lowdown on making your car run on water check out this guide
gasfromwater.onlineinfozone>> dot >>com
GR8 job and can u tell me what is the title of the dranei song!! PLZ5/5
Great info. I had the same problem, I will try this. Thank you.
Best method for calibration would be to take something of known Wattage. We used a 12V-50Watt Bulb, and used that for verifying the output in millivolts. Works really well if you ask me. Hope this helps someone out there make their tests that much more viable.