I heard that this canadian invented a device that splits water into hydrogen and oxygen. Companies use this device to store hydrogen in tanks until it can be used for a hydrogen fuel cell car(like they do in iceland). My question is can you store the Oxygen instead to go on the ultimate scuba adventure? My dads a scientist, but we’re not talking right now so I thought I would ask here.
Why don’t the auto makers just make a car that runs off of pure oxygen? Wouldn’t it be cheaper to make a car that takes in air form outside. Separates the nitrogen and compresses the oxygen using that for the combustion instead of putting thousands of dollars in to hydrogen fuel cell technology and electric cars? all it would require are storage tanks and a highly efficient air compressor as well as a slightly modified engine.
Fuel cell technology being developed by several automakers, namely Honda and Chevy, is a non-combustion form of energy unlike liquid hydrogen which essentially uses the same engine structure as conventional cars. This require liquid hydrogen to be kept in the vehicle at 420 degrees below zero which is costly. In fuel cells, hydrogen based cells are kept on stacks. A hydrogen – oxygen reaction creates electricity that powers the car. The fuel cells are refilled with the hydrogen chemical.
Gorilla Developers has been working on creating a method of extracting Hydrogen from water and an electrolyte solution.
This has now … all » been achieved. See the video to understand the incredible volume of Hydrogen being extracted.
How is this achieved? Using 30 amps from your alternator on standard vehicles for the 20-Cell electrolyzer we weave this energy Through an over 40 stainless steel plates which extract the Hydrogen necessary to aid in increased fuel combustion efficiency.
What does this mean to me? Your vehicle will have substantially increased fuel combustion. [Most vehiclesonly burn less than 50% of the fuel injected into your cylinder because of a lack of Oxygen and Hydrogen] The lower your mileage directly relates to the lack of your engines efficiency. Increasing the efficiency of the burn provides a requirement of less fuel [less pedal being required to achieve/maintain speed.]
Visit our web site and register today.
We seek local sales/support staff and installation locations.
Call 651-789-1830 for more information.
First of all, let me say it was a challenge to mount the HHO Generator on the front of my Tracker – where GOD and everyone could see it. I started this project 18 months ago. Hydrogen was not “The In Thing”. Word of the “Men In Black” had the masses hiding their free energy projects. Thanks to the world wide web, we are changing that. To help this Free Energy Movement, I built a web site on my home computer and opened it up to you. Visit http://www.hho4free.com and learn more about Hydrogen Electrolysis. It is Free Information.
This video is an Overview of the Installation Components on a 1994 GEO Tracker. The cell is pulling 30 amps, using KOH Electrolyte and tap water. At one point I talk about a 60 amp coil, I meant to say 60,000 volt coil. The Tracker went from 24 mpg to 35 mpg when I added the cell and the Oxygen Sensor EFIE Circuit. Without the EFIE, there was no mileage gain at all. The EFIE adds a little voltage to the O2 sensors voltage. The ECM (computer) thinks it is sending too much gasoline, so it leans out the mixture. Sends less gasoline.
The cell is controlled from the dash. I use a Digital Amp Meter to monitor the cell current, and Digital Volt meters for the Battery and MAP sensor. As you can see in the video, the PWM can be adjusted from zero amps to 80 amps. This comes in handy during winter driving. The cell is actually smaller than what the video shows, and it is higher off the ground than it appears to be.
The cell is mounted outside of the vehicle because I use it in Demonstrations. It is a real Eye Catcher.
Learn more at http://www.hho4free.com
Confirmation of capacitance with pure store bought distilled
Beginning construction of a spiral plate design for the new PWN resonance cell tests.
This is an original demo unit we used when we first started developing and testing on-demand hydrogen generation systems. It uses SS drains and creates incredible convection currents along with a decent gas production.
how to fill a hydrogen cell