16 thoughts on “Water Fuel Cell 2007 (Meyer by Lawton)

  1. H2earth says:

    Yes, but right now we’re interested in the WFC, rather than his later work (which remains under Patent in the U.S. till 2011).

  2. H2earth says:

    Yes, you are. Its possible to create, maintain, and switch high voltage without a large expenditure of energy. The Meyer Effect is *NOT* electrolysis, and depends entirely on voltage; ANY current appears to be counterproductive – including the free electron current arising from ionization and dissociation itself.

  3. H2earth says:

    Actually, we now have had an engine/alternator running itself off that gas, and powering the WFC, in closed loop. We’re collecting some video on that, and hope to have one to post shortly.

  4. GkillerDogg says:

    stan meyers, uses a pulse system, a simple invention in which to basicaly amplify power, thus creating more hydrogen through the electrolisis.

  5. absolom7691 says:

    Have you tried sandblasting the surface of the stainless steel to promote better nucleation? Maybe help give a better escape point for the gas. Just a thought. I am getting ready to build a unit. I am going to try that myself.

  6. wphuang2005 says:

    i am a newcome i try to build one following D14,do you have any detailed data as output of gas, voltage and current applied. and is it a series cell, or all cells in parallel connection?

  7. tree6014 says:

    I have built a cell (hundreds of dollars) and used his (David Lawton’s) plans for the pulsing circuit; however, mine is not performing like his. This has created a lot of work for us as scientific researchers. I am going to be incorporating one or two inductors because some of our theorists seem to think that could be the culprit based on new oscilloscope data that is more precise than we had before.

  8. tree6014 says:

    We aren’t currently separating the Hydrogen from the Oxygen; there is no reason to. It is produced in a stoichiometric mixture that is optimal for combustion.

  9. SemperPentensAlta says:

    HI,
    HAve you got plans for this to at least replicate what you have done? Have you connected it to a combustion engine yet? how do you go about collecting the H2 seperate from the O2?

  10. H2earth says:

    Yes. There is a complete design which Dave Lawton has published in .pdf on the web, however, as we speak, in realtime, this schematic is being revised. There is an Inductor left out of the circuit, which performs the same function as Meyer’s Resonant Charging Choke(s) in the original patents, which now appears crucial to its functioning properly.

  11. H2earth says:

    That’s suddenly become an interesting question. It was thought that the voltage never went above about 70v, however recently we’ve been examining the inductor and finding very high, very brief voltage spikes. More to come.

Leave a Reply

Your email address will not be published. Required fields are marked *