Beginning construction of a spiral plate design for the new PWN resonance cell tests.
25 thoughts on “#60 – Resonant Water Fuel Cell 01”
OutaSynchsays:
Try a coil of metal that has been roughened with very course grit sand paper in order to increase the surface area.
BigFireDavesays:
Z you do good work! I like this cell, I think we may be headed in the right direction here. Was considering a dry cell but this would take me more in the direction I want to go, I think. Is it still on a burner somewhere? I have some questions though. With SS have you tested your waste for chromim-6 (hexavalient chromium- SP??) If it is leaching from SS dont pour it down the drain! I am hoping to find a way to not use brute force and stay with plain water. Chromium-6 is dangerous stuff.
googleproadssays:
250257922526 ebay item…Power modulator
ZeroFossilFuelsays:
That’s the idea behind my EM Hybric cell, video #92.
astrolplainsays:
area of potential energy, nor the ability to contain the flow of electrons.
Maybe it is finding the resonate frequency, then neutrelizing it with the EMF force required, reducing it to zero. Maybe at that point the atoms will flee apart(migrate..enginer speak) and we will be left with …what can’t be done. too much potential for energy? I was where you are 30 years ago, what I dont have is your understanding. I am outside the box.
Don’t force the atoms apart..make them want to.
Steve
mistawiskassays:
This, I’m going to try!
GBS1043says:
you are on sort of the right track, but think of concentrated “fields” at certain ferquencies..that’s all I can say
plumberdanielsays:
A “U” shaped piece of acyrlic between each plate extending past the edge’s 1/2 inch or so. This should force the current thru the plate’s. I am about to try this on a cell I made. Or a picture frame effect if you want to submerge the whole cell.
bagrmanhdsays:
Zero Thank you for the work and ideas that you have provided. You mention gunk build up with certain SS plates. are you finding one type of Ss better then another? Was it you that had the little laser thermometer, in one of your vids.? If it was could do you know or could you find out what the temp is of your exhaust manifold, after running with HHO and without?
Thanks Again
Chris
12monkkeyssays:
My last comment was directed at “sn1pe352”.
“ZeroFossilFuel”, this idea of coiling the SS is fantastic! I can not wait to see the finished product.
Thanks for posting.
12monkkeyssays:
Lets see your work Punk. This is the 5th or 6th time I have seen you post your shit on different videos like this. Stop spam’ing your BS or Post a video. You are a fraud and can only dream of making anything close to this. Now go play with your mothers dresses and stop pretending you can actually work with your hands.
12monkkeyssays:
“sn1pe352” you talk a big game, but where is your video? If you surpassed this idea, which I feel is pure genius, lets see your work.
But you don’t have any “work”. You will come up with some pitiful excuse WHY… You are a coward that hides behind your keyboard.
Post you so called great work, or fuck up punk.
ninnzbinnzsays:
i think stan and others in the field are not using resonant frequency but using something to pump up the energy during there demonstration runs like magnetic energy or something like that. so the bystander will never be able to replicate the experiment. in other words they were good liers. i am not say that it didn’t work for them but that they used other methods not even remotely known by us the public.
woodypc35says:
dont worry about him zero. just keep it up. If he can do better then he can show us. or he can keep it to his greedy self and end up like stan.
hotrodfunsays:
I can see that this can be a nice hobby, and i guess it can also be quite addicting.. Thinking about new cell configurations even at night and realize that Stan Meyer was a genius with an extraordinary gift from above. I have to admit that i am only an amatur and most likely i will allways be one comparing to Meyer on this area. But we can`t give up because somebody is better (or think they are.) Thank you for posting your work, i enjoy to watch and find it interesting!
archtoponesays:
This last remark is directed at sn1pe352 , if he/she would like to “contribute”, we will all benefit. ~Thanks
archtoponesays:
Start posting videos and helping the rest of us out, or shut up. You’re not even helping yourself being such an ass.
ZeroFossilFuelsays:
Well, Hotshot? We’re all waiting. Spectacular claims demand spectacular proof. Put up or shut up.
I am a family man. I have a regular job, a house, a wife and children to support. I do not spend every spare moment tinkering with HHO. If you’ve exceeded my work, GREAT! All the power to you.
But if you’re going to be insulting, you had better put up or shut up and show us your working units.
sn1pe352says:
Not only have I surpassed you in the hydrogen field but Ive also replicated a Perendev magnetic motor as well .. better start opening up to new ideas
sn1pe352says:
It’s kind of hilarious that I learned about this stuff from zero and I’m already done building a complete replication of stanley meyers cell and he’s still doing this crap.
zero you need to wake up and realize tesla was right and Aether exist , John Hutchinson is real and is 100 percent correct
Sometimes faith in science can lead brilliant men to believe things that are not true, because they haven’t seen everything that science – or the universe – has to show them
superduty73says:
You say you expect some crud? Is 316 better than 304?
Is it hard to coil that thick metal, would you recomend any smaller gauge I herd thickness doesnt matter and that more surface area is better.
How is the cell held together, is it held by the bend of the metal or did you seal the ends to it self? Also how thick are the spacers.
Sorry for all the questions.
Thanks a lot, what your doing is great!!
ZeroFossilFuelsays:
Steel os 0.035″ 304 grade only because that’s all I had so I expect some crud. Haven’t tested enough to say anything about how well it compares to my previous designs.
superduty73says:
Is this the best style of cell you have discovered??? how thick is your steel? Nicely Done!!!
Try a coil of metal that has been roughened with very course grit sand paper in order to increase the surface area.
Z you do good work! I like this cell, I think we may be headed in the right direction here. Was considering a dry cell but this would take me more in the direction I want to go, I think. Is it still on a burner somewhere? I have some questions though. With SS have you tested your waste for chromim-6 (hexavalient chromium- SP??) If it is leaching from SS dont pour it down the drain! I am hoping to find a way to not use brute force and stay with plain water. Chromium-6 is dangerous stuff.
250257922526 ebay item…Power modulator
That’s the idea behind my EM Hybric cell, video #92.
area of potential energy, nor the ability to contain the flow of electrons.
Maybe it is finding the resonate frequency, then neutrelizing it with the EMF force required, reducing it to zero. Maybe at that point the atoms will flee apart(migrate..enginer speak) and we will be left with …what can’t be done. too much potential for energy? I was where you are 30 years ago, what I dont have is your understanding. I am outside the box.
Don’t force the atoms apart..make them want to.
Steve
This, I’m going to try!
you are on sort of the right track, but think of concentrated “fields” at certain ferquencies..that’s all I can say
A “U” shaped piece of acyrlic between each plate extending past the edge’s 1/2 inch or so. This should force the current thru the plate’s. I am about to try this on a cell I made. Or a picture frame effect if you want to submerge the whole cell.
Zero Thank you for the work and ideas that you have provided. You mention gunk build up with certain SS plates. are you finding one type of Ss better then another? Was it you that had the little laser thermometer, in one of your vids.? If it was could do you know or could you find out what the temp is of your exhaust manifold, after running with HHO and without?
Thanks Again
Chris
My last comment was directed at “sn1pe352”.
“ZeroFossilFuel”, this idea of coiling the SS is fantastic! I can not wait to see the finished product.
Thanks for posting.
Lets see your work Punk. This is the 5th or 6th time I have seen you post your shit on different videos like this. Stop spam’ing your BS or Post a video. You are a fraud and can only dream of making anything close to this. Now go play with your mothers dresses and stop pretending you can actually work with your hands.
“sn1pe352” you talk a big game, but where is your video? If you surpassed this idea, which I feel is pure genius, lets see your work.
But you don’t have any “work”. You will come up with some pitiful excuse WHY… You are a coward that hides behind your keyboard.
Post you so called great work, or fuck up punk.
i think stan and others in the field are not using resonant frequency but using something to pump up the energy during there demonstration runs like magnetic energy or something like that. so the bystander will never be able to replicate the experiment. in other words they were good liers. i am not say that it didn’t work for them but that they used other methods not even remotely known by us the public.
dont worry about him zero. just keep it up. If he can do better then he can show us. or he can keep it to his greedy self and end up like stan.
I can see that this can be a nice hobby, and i guess it can also be quite addicting.. Thinking about new cell configurations even at night and realize that Stan Meyer was a genius with an extraordinary gift from above. I have to admit that i am only an amatur and most likely i will allways be one comparing to Meyer on this area. But we can`t give up because somebody is better (or think they are.) Thank you for posting your work, i enjoy to watch and find it interesting!
This last remark is directed at sn1pe352 , if he/she would like to “contribute”, we will all benefit. ~Thanks
Start posting videos and helping the rest of us out, or shut up. You’re not even helping yourself being such an ass.
Well, Hotshot? We’re all waiting. Spectacular claims demand spectacular proof. Put up or shut up.
Vraiment intéressant!
I am a family man. I have a regular job, a house, a wife and children to support. I do not spend every spare moment tinkering with HHO. If you’ve exceeded my work, GREAT! All the power to you.
But if you’re going to be insulting, you had better put up or shut up and show us your working units.
Not only have I surpassed you in the hydrogen field but Ive also replicated a Perendev magnetic motor as well .. better start opening up to new ideas
It’s kind of hilarious that I learned about this stuff from zero and I’m already done building a complete replication of stanley meyers cell and he’s still doing this crap.
zero you need to wake up and realize tesla was right and Aether exist , John Hutchinson is real and is 100 percent correct
Sometimes faith in science can lead brilliant men to believe things that are not true, because they haven’t seen everything that science – or the universe – has to show them
You say you expect some crud? Is 316 better than 304?
Is it hard to coil that thick metal, would you recomend any smaller gauge I herd thickness doesnt matter and that more surface area is better.
How is the cell held together, is it held by the bend of the metal or did you seal the ends to it self? Also how thick are the spacers.
Sorry for all the questions.
Thanks a lot, what your doing is great!!
Steel os 0.035″ 304 grade only because that’s all I had so I expect some crud. Haven’t tested enough to say anything about how well it compares to my previous designs.
Is this the best style of cell you have discovered??? how thick is your steel? Nicely Done!!!