Here is my hydrogen generator, as it will go into the Saturn SL2. The HHO generator is on the right and is filled quite full with water. The gas and some liquid travels through the upper tube into the filter. Most of the water is deposited into the filter housing and migrates back into the GEN by way of the tube at the bottom. It is important that we do not filter all of the water vapor, as that aids in combustion.
Assembly
How to assemble the HHO generator part 2
I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
How to assemble the HHO generator part 1
I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end thread exposed for connecting it to the center tube. The holes in the pipes that the positive lead screw passes through are twice the size of the screw, leaving plenty of room for the screw and insulation to fit through……if your holes are aligned.