John Kanzius’ Water Fuel Cell

John Kanzius Water Fuel Cell/Cancer Treatment

John Kanzius, while researching a way to treat cancer & other diseases, stumbled a across the same principal as Stan Meyer’s Water Fuel Cell. Unlike Meyer’s device, which uses submerged stainless steel electrodes in a common feed stock of water, Mr. Kanzius’ device doesn’t make contact with the water — it pulses relatively low energy across an area, such as the human body, which is made of mostly water, or across a test tube of salt water. The salt in the water helps catalyze the process (by increasing the conductivity of the water).

The device can also be looked at as a water capacitor. Water is the feed stock and the pulses (electrical & radio waves) disassociate the hydrogen & oxygen atoms by magnetically stretching apart the atoms through constant magnetic excitation. Parallel plates, or circular or spiral electrodes or transducers all have the ability to tap energy from the quantum flux field. When these devices are used with water such as John Kanzius’ device, the energy from the quantum flux field is tapped into, then trapped by the water, turning it into a charged gas of diatomic & monatomic hydrogen & oxygen atoms, in a mixture of hydrated electrons. When combusted, the plasma implosion/explosion forms back into pure water. The plasma gas is a stoichiometric blend that is perfect for combustion applications.

This device behaves very similarly to Stan Meyer’s Electron Extraction Circuit (which uses lasers), and is the key electronic mechanism which makes his device a true water fuel cell, because the EEC produces an electrical current. The transducers, which face each other, vibrate a high radio frequency (in the ~20KHZ-200KHZ region). The power is low enough not to cause bodily harm, so is perhaps less than 200 watts. Since there is little if any heat build up between the working transducers, the excess energy exhibited with the Brown’s gas can not be traced, thus pointing to the quantum vacuum as the source of free energy.

John Kanzius’ device may be the same explanation for the technology behind the Segway inventor, Dean Kaman’s newest invention, the WATER PURIFIER.

http://www.time.com/time/2003/inventions/invwater.html

Although John Kanzius’ device has made recent news including on the Colbert Report, it must also be noted that this technology has been around the medical pioneer field for a bit longer. To see a similar technology for treating cancer using microwaves, please see the Sterling Allan PES interview with Joel Fallik (on 06-07).

http://pesn.com/Radio/Free_Energy_Now/

For those who are developing their own clean energy and zero-point energy systems, or for those who would like to be involved with this promotion, please visit:

http://www.theorionproject.org

HHO Generator Installation on a GEO Tracker – Part 1

http://www.hho4free.com

First of all, let me say it was a challenge to mount the HHO Generator on the front of my Tracker – where GOD and everyone could see it. I started this project 18 months ago. Hydrogen was not “The In Thing”. Word of the “Men In Black” had the masses hiding their free energy projects. Thanks to the world wide web, we are changing that. To help this Free Energy Movement, I built a web site on my home computer and opened it up to you. Visit http://www.hho4free.com and learn more about Hydrogen Electrolysis. It is Free Information.

This video is an Overview of the Installation Components on a 1994 GEO Tracker. The cell is pulling 30 amps, using KOH Electrolyte and tap water. At one point I talk about a 60 amp coil, I meant to say 60,000 volt coil. The Tracker went from 24 mpg to 35 mpg when I added the cell and the Oxygen Sensor EFIE Circuit. Without the EFIE, there was no mileage gain at all. The EFIE adds a little voltage to the O2 sensors voltage. The ECM (computer) thinks it is sending too much gasoline, so it leans out the mixture. Sends less gasoline.

The cell is controlled from the dash. I use a Digital Amp Meter to monitor the cell current, and Digital Volt meters for the Battery and MAP sensor. As you can see in the video, the PWM can be adjusted from zero amps to 80 amps. This comes in handy during winter driving. The cell is actually smaller than what the video shows, and it is higher off the ground than it appears to be.

The cell is mounted outside of the vehicle because I use it in Demonstrations. It is a real Eye Catcher.

Learn more at http://www.hho4free.com

Pulsing Hydrogen Fuel Cell – Resonant Charging Choke Concept

Just trying to go over some concepts that Stanley Meyers had related to his patents regarding the Resonant Charging Choke. Which is basically Telsa’s BiFiler Coil Design.

Which basically is how to connect the WFC to the bifilar coil for maximum efficiency and if you have higher resistance and impedance than the WFC you can inhibit amp flow and allow voltage to go to the maximum.

100 WATTS TORCH HHO HYDROGEN GENERATOR FLAME

The Best HHO Fuel Cell Generator Conversion Kit Click Here
Setup Primary and secondary electrode, secondary 13x diameter 52mm, bottom is Primary electrode with small 5 rectan.
plates 20x45mm to push the gas of the secondary electrode out of the plates.
power 12v 8amp

How To Make A Hydrogen Generator HHO Fuel Cell

Click Here for the HHO Generator Install Ebooks with modifications